Fiberglass Mesh Manufacturer in China

GuangSou (WGEBU) supplies fiberglass mesh rolls for construction-material distributors, EIFS and plastering system buyers, contractors, building-material wholesalers, and manufacturers that require reinforcement materials for wall, roofing, waterproofing, stone, and related applications. We provide fiberglass mesh in standard and customized specifications, including different weights, mesh sizes, colors, widths, roll lengths, packaging formats, and private-label options.

Fiberglass mesh is used as a reinforcement layer in many cement-based and polymer-modified systems. The correct product specification depends on the substrate, coating or adhesive system, intended application, required reinforcement level, local climate, installation method, and project requirements. Buyers should therefore confirm technical details before ordering instead of selecting fiberglass mesh only by appearance or price.

This guide explains the main fiberglass mesh specifications, common applications, production and quality-control considerations, customization options, and the information needed for an accurate quotation.

Fiberglass Mesh Products We Supply

Fiberglass mesh is available for a range of construction and building-material applications. Product selection should be based on the reinforcement system and technical requirements of the intended use.

• Alkali-resistant fiberglass mesh for wall reinforcement and plaster systems

• EIFS fiberglass mesh for exterior insulation and finish systems

• Fiberglass mesh for cement render, stucco, mortar, and skim-coat applications

• Fiberglass mesh for waterproofing membranes and roofing reinforcement

• Fiberglass mesh for marble, stone, mosaic, and tile-back reinforcement

• Colored fiberglass mesh for building-material distribution and project identification

• Self-adhesive fiberglass mesh tape for wall repair and drywall joint reinforcement

• Fiberglass window screen mesh for insect-screen and door-screen applications

Different applications may require different mesh openings, fabric weights, coating systems, yarn constructions, roll formats, and packaging. Our team can help buyers compare available options according to their technical requirements and order quantity.

Fiberglass Mesh Specifications Buyers Should Confirm

A fiberglass mesh roll should not be evaluated by product name alone. Before ordering, buyers should confirm the specification sheet and, where required, approve a sample. The following points are especially important for construction-material procurement.

If your project specification includes tensile strength, alkali resistance, coating content, yarn construction, roll weight tolerance, or other test requirements, please provide those details before ordering. This allows the appropriate fiberglass mesh specification to be confirmed before production.

Common Applications of Fiberglass Mesh

Wall Reinforcement and Plastering

Fiberglass mesh is widely used as a reinforcement layer in cement render, plaster, mortar, skim-coat, and wall-finishing systems. When installed according to the requirements of the applicable system, the mesh helps distribute stress across the surface and supports the reinforcement layer in areas where cracking resistance is required.

EIFS and Exterior Insulation Systems

In external insulation and finish systems, fiberglass mesh is commonly embedded within the base-coat layer. Mesh selection should match the project system, substrate, finish material, and reinforcement requirements. Buyers should confirm the recommended mesh weight, opening size, coating performance, and installation guidelines with the system designer or project technical team.

Waterproofing and Roofing Systems

Fiberglass mesh can be used as a reinforcement component in selected waterproofing and roofing applications. The appropriate product depends on the membrane, coating, adhesive, construction method, and performance standard required by the project.

Marble, Stone, and Tile Backing

Fiberglass mesh is also used in stone and marble processing to reinforce the back of slabs and related materials. The required mesh construction and coating should be selected based on the stone-processing method, adhesive system, and handling requirements.

Building-Material Distribution and Private Label Supply

Distributors and wholesalers may require standardized roll sizes, branded labels, color selection, cartons, barcodes, pallet arrangements, or mixed-container orders. These requirements should be confirmed at the quotation stage so that packaging and delivery arrangements can be planned correctly.

How Fiberglass Mesh Is Produced

Fiberglass mesh production typically involves fiberglass yarn preparation, 機織り, coating, drying, inspection, cutting or slitting, roll formation, labeling, and packaging. Each stage can influence the final appearance, roll dimensions, handling characteristics, and consistency of the mesh.

At WGEBU, production requirements are confirmed according to the agreed specification before the order is arranged. For customized orders, buyers should confirm the required weight, mesh size, width, length, color, packaging method, labeling, and quantity in advance.

Typical Production Steps

• Confirm fiberglass yarn and product construction requirements

• Weave the mesh according to the required opening size and fabric structure

• Apply the selected coating system according to product requirements

• Dry and stabilize the coated mesh

• Check roll dimensions, appearance, color, and packaging requirements

• Cut, rewind, label, package, and prepare rolls for shipment

The exact process may vary by product type, weight, coating requirement, and customer specification. For performance-critical projects, buyers should define applicable testing standards and acceptance criteria before production.

Quality Checks Before Shipment

Quality control should focus on the requirements that matter for the final application. A practical inspection plan may include checks for mesh size, roll width, roll length, weight, color consistency, coating appearance, packaging condition, and order labeling.

• Verify the ordered mesh opening and fabric appearance

• Check roll width and roll length against the purchase specification

• Confirm the required weight range or roll-weight requirement

• Check color consistency for colored fiberglass mesh orders

• Confirm packaging, labels, cartons, and pallet requirements

• Review quantity, roll count, and shipping marks before loading

• Arrange pre-shipment inspection when required by the buyer

If third-party inspection, sample approval, test reports, or customer-specific quality documentation is required, this should be stated before order confirmation. Requirements can then be evaluated based on the product specification and order arrangement.

How to Evaluate a Fiberglass Mesh Manufacturer

When comparing fiberglass mesh manufacturers or suppliers, buyers should look beyond a low quoted price. A lower price can reflect a different weight, coating level, yarn construction, roll length, packaging standard, or quality-control scope. To compare quotations fairly, request the same product specification from each supplier.

A complete, specification-based quotation helps reduce misunderstandings between the buyer and supplier. It also makes it easier to compare products on a like-for-like basis.

Customization and OEM Supply

WGEBU can discuss customized fiberglass mesh specifications according to the buyer’s application, sales format, and packaging requirements. Customization is subject to technical feasibility, order quantity, production scheduling, and confirmation of the final product specification.

• Customized mesh size

• Customized fabric weight

• Customized roll width and roll length

• Customized color

• Customized roll labels and shipping marks

• Customized retail carton and outer packaging

• Private-label and OEM packaging options

• Pallet or export packaging arrangements

For OEM or private-label orders, please provide your artwork, label dimensions, carton requirements, barcode requirements, packing quantity, and destination market information. We will review the details before confirming the production arrangement.

Information Needed for a Fiberglass Mesh Quotation

To receive an accurate fiberglass mesh quotation, please provide as many of the following details as possible:

• Intended application, such as plastering, EIFS, roofing, waterproofing, marble, or wall reinforcement

• Required mesh size

• Required weight in g/m²

• Color requirement

• Roll width and roll length

• Estimated order quantity

• Packaging, labeling, carton, or pallet requirements

• Destination country, port, or delivery address

• Required incoterm, such as EXW, FOB, CIF, or another agreed term

• Sample, testing, inspection, or certification requirements

If you are unsure which specification is appropriate, send photographs of the intended application, an existing sample, a project specification, or the product details currently used in your market. This information can help identify suitable options for discussion.

Frequently Asked Questions

What is the most common fiberglass mesh size for wall reinforcement?

Common mesh sizes for wall reinforcement include 4 × 4 mm and 5 × 5 ミリメートル, but the correct selection depends on the plaster, mortar, EIFS, waterproofing, or reinforcement system. Buyers should confirm the mesh requirement with the project specification or technical team.

What fiberglass mesh weight should I choose?

The correct weight depends on the intended application and required reinforcement level. Lighter and heavier mesh options may be used for different systems. Confirm the required g/m², mesh size, coating, and project requirements before placing an order.

Can fiberglass mesh be customized?

はい. Mesh size, weight, color, roll width, roll length, packaging, labels, cartons, and private-label requirements can be discussed based on product feasibility and order quantity.

Do you provide samples?

Sample availability, courier arrangements, and sample specifications can be confirmed before a bulk order. Please provide the product specification and destination so that the sample arrangement can be discussed accurately.

Can you provide OEM labels and packaging?

OEM labels, outer packaging, cartons, shipping marks, and private-label requirements can be evaluated based on the confirmed artwork, packaging specification, and order quantity.

What information should be included in a purchase order?

A purchase order should state the product name, mesh size, weight, coating requirement, color, width, length, quantity, packaging, label requirement, delivery term, destination, and any inspection or documentation requirements.

How can I compare fiberglass mesh quotations from different suppliers?

Compare quotations using the same specification: mesh size, g/m², roll dimensions, coating, color, packaging, order quantity, delivery term, and quality requirements. Comparing only the price per roll without confirming these details can lead to inaccurate comparisons.

How can I request a quotation?

Send your required application, mesh size, weight, roll dimensions, color, quantity, packaging requirements, and destination country or port. Our team can then review the specification and provide a quotation based on the requested details.

Request a Fiberglass Mesh Quotation

Contact GuangSou (WGEBU) to discuss fiberglass mesh specifications for wall reinforcement, plastering, EIFS, waterproofing, roofing, stone processing, distribution, or private-label supply. Send your product requirement, target application, quantity, packaging requirement, and destination market for a specification-based quotation.

お 問い合わせ | View Fiberglass Mesh Products | Explore Fiberglass Mesh Categories